Before releasing the rescue boat, the tools and spare parts inside the boat should be checked, check whether the boat davit is suitable. The boat davit should be tested, the brakes should be intact, and the guide pulley, steel wire rope, and boat hook should be inspected. Confirm that the boat bottom plug is undamaged. Check if the fuel for the rescue boat is sufficient and suitable, and start the engine once.
2. Release the rescue boat according to the ship's emergency deployment, and the captain is responsible for inspection and command; The mechanical part is inspected by the chief engineer.
3. The person responsible for inspecting and commanding the release of the rescue boat should report the preparation work before releasing the rescue boat to the captain, and only after approval for releasing the rescue boat, ensuring that there are no obstacles below the rescue boat.
4. When releasing the rescue boat during navigation, the captain should grasp the timing and only release the rescue boat into the water at low speed after stopping. When releasing rescue boats in wind and waves, it is necessary to prevent them from colliding with the mother ship. When releasing the boat hook, the rescue boat engine should be activated first to achieve coordinated action.
