The operation of recovery rescue boats
1.1 Drive the rescue boat to the leeward side of the mother ship, use the boat pole and power to stop the rescue boat relatively stationary near the boarding ladder or below the gangway, tie the ropes, and the personns on the rescue boat board the mother ship one by one;
1.2 Leave two people on the boat to fix the rescue boat rope lifting ring to the hook;
1.3 Use a davit (single arm davit or A type davit) to lift the rescue boat;
1.4 Stop the engine after the rescue boat leaves the water surface;
1.5 During the process of lifting the rescue boat, avoid excessive force on the slings;
1.6 After the rescue boat is lifted in place, fix it and remove the bottom plug to avoid water accumulation inside the boat;
1.7 Secure the bow and stern ropes of the rescue boat separately and insert safety pins.
